Modbus Gateway

RC32

 
 

- Convert between Modbus TCP and Modbus RTU/ASCII
  - 1 Ethernet port and 1RS-232, RS422/485 ports0/100 Mbps
  - Supports  8 simultaneous TCP masters with up to 32 simultaneous requests per master
  - Easy hardware setup and configuration
 
Relative Software RC32_Utility
 

The RC32 Is standard Modbus gateways that Convert between Modbus TCP and Modbus RTU/ ASCII protocols.
Up to 8 simultaneous Modbus TCP masters are supported, with up to 31 RTU/ASCII slaves per serial port.

 
Specifications
 

• LAN Interface

Speed 10/100 Mbps, Auto MDI/MDIX
Connector(s) 8-pin RJ45 
Magnetic Isolation Protection 1.5 KV built-in

• Serial Interface

Serial Standards RS-232/422/485, software selectable
Connectors DB9 male for RS-232, Terminal block for RS-422/485

• Serial Communication Parameters

Data Bits 7, 8 Stop Bits 1, 2 Parity None, Even, Odd,
Baudrate 4800 bps to 112 Kbps

• Serial Signals

RS-232 TxD, RxD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485 Data+, RS-485-2w Data+, Data-, GND Data-, GND

• Environmental Limits

Operating Temperature Standard Models: 0 to 55°C (32 to 131°F)
Operating Humidity 5 to 95% RH
Storage Temperature -20 to 85°C (-4 to 185°F)

• Power Requirements

Input Voltage 220VAC, 12VDC, 24VDC
Power Connector Terminal block
• Mounting Wall or DIN Rail
• Dimension W50 × H70 × D130 mm.
   
   
   
Ordering Information Specify Power Supply
Example RC32/220 VAC
 
การใช้งาน Module
 
 
แก้ไขครั้งล่าสุด 19 / มีนาคม / 2552